Task preview
Номер | project | Category | Visibility | Создан | Изменен |
---|---|---|---|---|---|
0001762 | RasKon | Wishes | public | 2018-06-22 15:01 | 2022-07-09 19:39 |
Initiator | ADGroup | Responsible | ADGroup | ||
Priority | ordinary | Influence | small | Reproducibility | untested |
Condition | closed | Decision | solved | ||
Целевая версия | 10.11 | Решена в версии | 10.11 | ||
Theme | 0001762: New optional methodology for marking the water spouts for machining centers, not opposite each impost, but evenly along the length. | ||||
Description | External Drainage only at the bottom up to 500 , 1 drain in the center 500 to 1500 , 2 drains 100 from each edge 1500 to 2200, 3 drains 100 from each edge. center to center 2200 and more 4 drains 100 from each edge. the other 2 in the area between the end drains = at the same distance from each other. | ||||
Tags | Processing operations | ||||
Number of references | |||||
Implementation period (days) | |||||
Cost | |||||
Planned date | |||||
|
The option "Horizontal drainage (downspouts) to be distributed evenly along the length" has been made in the environment settings, global paramaters. To the formula made an addition that the width of the contruccion above 2200 will be a minimum of 4 drains and will be added to 1 additional drain every additional 700 mm width of the structure, in the formula for calculating additional drains also involves the size of the indentation for two vodootlivov on the edges. That is, if the indentation of downpipes will be for example 100 mm, then an additional fifth downpipe will appear only when the width of the structure 3100 mm (3100-2*100-2200)/700 = 1 additional downpipe besides the 4 necessary at a width of 2200. |
This problem is marked solved. If you think it is not, please reopen it and explain why. |
|
Supporters: | No supporters have yet voted in favor of the task. |
Neutrality: | No users have yet voted neutral for this task. |
Opponents: | No opponents have yet voted in favor of this task. |
Date of change | User | Field | Modify |
---|---|---|---|
2018-06-22 15:01 | ADGroup | New task | |
2018-06-22 15:01 | ADGroup | Condition | new => assigned |
2018-06-22 15:01 | ADGroup | Responsible | => ADGroup |
2018-06-22 17:17 | ADGroup | Condition | assigned => closed |
2018-06-22 17:17 | ADGroup | Decision | open => solved |
2018-06-22 17:17 | ADGroup | Resolved in version | => 10.11 |
2018-06-22 17:17 | ADGroup | Comment added: 0001819 | |
2022-07-09 19:39 | ADGroup | Label added: Machining operations |