Task preview
Номер | project | Category | Visibility | Создан | Изменен |
---|---|---|---|---|---|
0001736 | RasKon | Wishes | public | 2018-04-26 13:35 | 2018-04-26 18:21 |
Initiator | ADGroup | Responsible | ADGroup | ||
Priority | ordinary | Influence | small | Reproducibility | untested |
Condition | closed | Decision | solved | ||
Целевая версия | 10.09 | Решена в версии | 10.09 | ||
Theme | 0001736: In the file for the Shirmer machining center, in the P field, add a notation for the position of the profile part in the drawing. | ||||
Description | The P field must be 5 characters long. The designation is added as follows: XYZZZZ, further decoding. X - symbol to indicate the position of the profile for frame/sash LRUD (left, top, right, bottom), for impost VH (vertical, horizontal). Y - symbol to indicate the sash profile position RPUD (handle side, hinge side, top, bottom). This designation also works for the frame profile, showing which side of the sash is adjacent to it. ZZZ - angle of inclination of the profile axis in the drawing to the OX axis in whole degrees. | ||||
Tags | There are no associated tags. | ||||
Number of references | |||||
Implementation period (days) | |||||
Cost | |||||
Planned date | |||||
This problem is marked solved. If you think it is not, please reopen it and explain why. |
|
Supporters: | No supporters have yet voted in favor of the task. |
Neutrality: | No users have yet voted neutral for this task. |
Opponents: | No opponents have yet voted in favor of this task. |
Date of change | User | Field | Modify |
---|---|---|---|
2018-04-26 13:35 | ADGroup | New task | |
2018-04-26 13:35 | ADGroup | Condition | new => assigned |
2018-04-26 13:35 | ADGroup | Responsible | => ADGroup |
2018-04-26 14:44 | ADGroup | Description changed | |
2018-04-26 18:21 | ADGroup | Condition | assigned => closed |
2018-04-26 18:21 | ADGroup | Decision | open => solved |
2018-04-26 18:21 | ADGroup | Resolved in version | => 10.09 |
2018-04-26 18:21 | ADGroup | Comment added: 0001779 |